Ice Makers Repair, Done Right the First Time

Electrolux’s Icon 15-inch under-counter ice makers, including the E15IM60GPS, are installed as their own stand-alone unit beneath a counter, with a dedicated water supply and drain rather than sharing the water line of a nearby refrigerator. Each is rated for a set daily production pace, and most of what we see on these units is that pace slowing down over time rather than the ice maker stopping outright.

Hard water is the biggest factor behind slowing production. Scale coats the surface the ice forms on and narrows the water lines feeding it, and Electrolux’s own use and care guide for these models includes a cleaning procedure meant to run on a schedule, before scale becomes a repair call rather than routine maintenance. When a unit is already producing one solid slab instead of individual cubes, the cutter grid that is supposed to divide the ice sheet as it freezes is usually the first thing checked.

A slow or partly blocked drain line is the other frequent cause of standing water beneath the cabinet or a bin that overflows, and it is checked at the drain line and pump before anything electrical. Where a water inlet valve or a sealed-system part needs replacing, the model and revision are confirmed from the data plate first, since Electrolux has sold more than one 15-inch under-counter ice maker generation with the same footprint.

Common Ice Makers Problems

Popular Electrolux Ice Makers Models

Why Trust Us With Your Electrolux Ice Makers

• Failed a Test, Then Replaced | A ice makers part only goes on your estimate after it has failed a test in front of the technician.
• Stocked For ice makers Repairs | The parts that give out most often on an Electrolux ice makers travel with us, so most visits finish in one. Anything less common gets ordered specifically against your model number rather than kept on the shelf on the chance it is needed.
• Your Model, Not a Guess | Electrolux has revised its control boards and platforms more than once over the years these machines stay in service, and a ice makers fix that suits one generation can be wrong for the next. A quick photo of the label inside the door or on the interior wall when you book clears that up before the technician even arrives.
• Honest About Age | When an older ice makers is not worth repairing, we say so. It is the one recommendation that costs us the job.