The EI15IM60GPS makes ice from a steady water supply and drains the melt from its bin. In hard-water areas, scale on the evaporator plate slows production long before anything breaks, so cleaning with an approved ice machine cleaner is the first step. Water on the floor under an EI15IM60GPS usually comes from the drain side: […]

The E15IM60GSS differs from the Professional E15IM60GPS in its door styling; the ice-making system is the same family. Cloudy or thin cubes usually point to scale or low water flow rather than a failing part. An E15IM60GSS that hums but makes no ice may have a water valve that does not open. We check the […]

The E15IM60EBS is one of the first Icon ice makers. In ice makers of this type, ice in the bin slowly melts and drains away by design; a bin that empties unusually quickly usually means the door gasket or the drain setup is letting warm air in. Slime in the drain line of an E15IM60EBS […]

The E15IM60EPS is an earlier Icon under-counter ice maker. Clear-ice makers like this one freeze ice in a slab that a cutter grid divides; a failed grid leaves a solid sheet. If the E15IM60EPS bin fills with a slab, the cutter grid is tested.

The EI15IM55GS is an IQ-Touch under-counter ice maker. Its production depends on water supply and room temperature; in a hot space it simply makes less. We check water pressure and room temperature on an EI15IM55GS before any part.

The E15IM60GPS is an Icon 15-inch under-counter ice maker with a service manual. Scale from hard water slows ice production, and the cleaning procedure in its guide is the first step before any repair. An E15IM60GPS that overflows usually has a slow drain, which is checked at the drain line or pump.