The EI28BS80KS is a K-generation standard-depth French-door with a freezer ice maker. The ice maker can be test-cycled by a technician, as the service data sheet describes, to separate an ice maker failure from a water supply problem. Frost across the freezer back panel of an EI28BS80KS means defrost is the priority, since it can […]

The EW28BS70IS is an early standard-depth Wave-Touch French-door. It shares the IQ-Touch models’ cooling layout, so fan and defrost repairs are the same, while the Wave-Touch panel adds its own display board. When an EW28BS70IS panel stops responding, we check for moisture behind the glass before replacing the board.

The EW28BS71IS is the Wave-Touch standard-depth French-door built across many revisions. Ice dispenser jams on this model tend to follow long vacations, when unused cubes fuse in the bin. Before a trip, emptying the bin of an EW28BS71IS avoids a DI SP alarm on return.

The EW28BS85KS is a K-generation Wave-Touch French-door. After a power cut it shows the power failure indicator, and Electrolux’s article says to press Alarm Reset once power is restored. If an EW28BS85KS shows PF without any outage, we check the receptacle and plug for a loose connection.

The EW28BS87SS is a later Wave-Touch standard-depth French-door. A drip under the dispenser often comes from the water line in the door hinge or a cracked fitting, not the valve at the back. We trace the leak path on an EW28BS87SS before ordering parts, since the door line and the rear valve are different repairs.

The ERFC2393AS is one of Electrolux’s current French-door refrigerators. Most early questions concern setup: the ice maker takes up to a day to start producing, and leveling affects how the doors close. If an ERFC2393AS door does not swing shut, the front leveling legs are raised slightly so gravity closes the doors.

The E23CS78EPS is an Icon counter-depth side-by-side. Its narrow freezer section keeps the ice bin close to the evaporator fan, and a fan that ices up affects both the ice maker and the fresh-food temperature. On an E23CS78EPS with a warm fridge and a quiet freezer fan, defrost is checked along with the fan.

The E23CS78DSS is an earlier Icon side-by-side. On side-by-sides the ice maker sits at the top of the freezer, and ice buildup around it often traces to a door that does not seal at the top corner. We check the freezer gasket along its full length on an E23CS78DSS with ice around the ice maker.

The E23CS78GPS is a G-generation Icon side-by-side. A fan that grows louder over weeks is a typical sign of bearing wear or ice contact, and replacing it before it stops avoids a warm fridge. We match the fan motor to the revision on an E23CS78GPS, because revisions can change motor style.

The E23CS78HPS is an H-generation Icon side-by-side with a factory parts catalog, so parts can be identified by diagram. Dispenser complaints split between the ice auger and the water valve, and each is tested separately. If ice dispenses but water does not on an E23CS78HPS, the valve or a frozen door line is suspected.