What iD0 / iD1 Means
These are wash motor tacho codes, stored and shown only in service mode. iD1 is set when there is no speed signal for 5 seconds and the heater is paused; if there is still no signal 30 seconds later, iD0 follows, the motor is set to full speed and the heater is not used. Checks are the wash motor harness and then the motor.
Common Causes of iD0 / iD1
- Wash motor speed signal lost
- Harness to the wash motor loose
- Wash motor failing
🔧 One Safe Check You Can Try
You may notice louder washing and no heat. There is no owner step; book service.
⚠ Why You Shouldn't Go Further Than That
- The wash motor is under the tub.
- Running without heat means poorer drying and sanitizing.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.