What F26 Means
F26 is a communication failure with the mini oven control on Electrolux ranges that have one. The service action is to check the harness from the main oven control to the mini oven control and confirm 15 VDC on the red and gray wires; with good harness and voltage the mini oven control is replaced, and then the main control if F26 returns.
Common Causes of F26
- Harness to the mini oven control loose
- No 15 VDC supply to the mini control
- Mini oven control failed
🔧 One Safe Check You Can Try
Reset at the breaker for 30 seconds.
⚠ Why You Shouldn't Go Further Than That
- Voltage checks are made inside the backguard.
- Both controls are model-specific parts.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- F26
- Appliance
- Electrolux ranges
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.