What F31 Means
F31 is a shorted probe connection. Electrolux’s service literature says that if the sensor reads less than 500 ohms at room temperature it should be replaced, and the harness checked for a short between the control and the sensor connector.
Common Causes of F31
- Oven sensor shorted
- Sensor harness pinched against the cabinet
🔧 One Safe Check You Can Try
Reset at the breaker. If F31 returns, book service.
⚠ Why You Shouldn't Go Further Than That
- A shorted sensor can make the oven underheat or refuse to start.
- The harness runs behind insulation at the rear of the oven.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- F31
- Appliance
- Electrolux ranges
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.