What EA5 / EAE Means
EA5 is a main voltage sensing failure and EAE a line safe relay sensing failure. Both are the washer’s own checks on how it measures and switches incoming power. Test 12 applies: confirm the supply, then replace the main board.
Common Causes of EA5 / EAE
- Voltage sensing circuit on the main board failed
- Safety relay on the main board failed
- Supply problem at the receptacle
🔧 One Safe Check You Can Try
Reset the washer by unplugging it for a minute. If either code returns on a known-good receptacle, book service.
⚠ Why You Shouldn't Go Further Than That
- The safety relay is part of the main board’s protection design and is not bypassed.
- Checking it means working on live circuits.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- EA5 / EAE
- Appliance
- Electrolux washers
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.