Medium - Inspection Needed

Electrolux Dryer E73 and E74 Error Code

E73 is an open inlet control thermistor circuit and E74 a shorted one. The inlet thermistor watches the air entering the drum after the heater. Electrolux gives 47 to 66 kilohms at 68 to 77 F as the correct reading.

What E73 / E74 Means

E73 is an open inlet control thermistor circuit and E74 a shorted one. The inlet thermistor watches the air entering the drum after the heater. Electrolux gives 47 to 66 kilohms at 68 to 77 F as the correct reading.

Common Causes of E73 / E74

  • Inlet thermistor failed open (E73) or shorted (E74)
  • Wiring near the heater duct damaged by heat

🔧 One Safe Check You Can Try

Reset the dryer by switching off power for a minute. If the code returns, book service; the inlet thermistor sits on the heater duct behind the drum.

⚠ Why You Shouldn't Go Further Than That

  • The inlet thermistor is next to the heater, reached from inside the cabinet.
  • Guessing between the thermistor and the harness wastes a part.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
E73 / E74
Appliance
Electrolux dryers
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.

Other Dryers Error Codes

Related Guides

Still Seeing E73 / E74?

Book a trained technician and get it diagnosed correctly the first time — no guesswork, no repeat visits.

Book Repair for E73 / E74

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 483-2989 now

FAQ

E73 / E74 FAQ

The inlet one reads hot air going into the drum; the outlet one reads air leaving it. Their codes and resistances differ.

Indirectly. Overheating can damage the thermistor or its wiring.

Need a repair? We're ready to help. Call Now
Call Us Schedule