To keep a glass-ceramic or induction cooktop looking new, lift cookware instead of sliding it, wipe spills once the surface is cool enough to touch, and clean with a cooktop-specific cream and a soft cloth. Avoid abrasive pads and general-purpose cleaners. Fine scratches build up slowly, so daily habits matter more than any special product.
What actually damages a glass cooktop surface?
The smooth glass-ceramic surface on Electrolux electric and induction cooktops is easier to scratch or permanently mark than most people expect. There is no burner assembly to take apart, but a few bad habits can leave lasting damage even though the cleaning routine looks harmless.
Sliding heavy cookware across the surface instead of lifting it is one of the most common causes of fine scratches, which add up to a hazy, duller finish. Sugary spills are another culprit. Anything with a high sugar content that boils over and hardens can bond to the glass and cause pitting if it is not dealt with while the surface is still warm, though never so hot that touching the spill risks a burn. Abrasive scouring pads and cleaners not made for glass cooktops dull the surface slowly, which is why many people never connect the haze to the product.
How should you clean the surface day to day?
Three habits do the most to protect the surface over years of daily use. Wipe up spills once the cooktop has cooled enough to touch safely. Use a cooktop-specific cleaning cream with a soft cloth or a dedicated cooktop scraper, never a knife or an abrasive pad. Lift cookware rather than sliding it.
A glass cooktop cleaner applied from time to time, even without a particular spill, leaves a thin protective layer that makes later cleanup easier. Always let the surface cool and check the indicator light before you clean, and keep wet cloths away from any zone that is still hot. The table summarizes what to do and what to avoid.
| Situation | Do this | Avoid this | Why it matters |
|---|---|---|---|
| Sugary spill while cooking | Remove it promptly with a scraper while warm, not hot | Letting it cool and harden | Sugar can bond to the glass and pit it |
| Daily wipe-down | Cooktop cream and a soft cloth | Abrasive pads | Pads cause fine scratches and dulling |
| Moving a heavy pot | Lift it | Sliding it across the glass | Sliding scratches the finish |
| Rough-bottomed pan | Replace or retire it | Cooking on a pitted base | Rough bases wear the glass |
| Crack or chip appears | Stop using the zone | Continuing as normal | Damage can spread and affect safety |
Do your pots and pans matter?
Yes. Pots and pans with rough, pitted or heavily worn bottoms wear the surface faster than smooth-bottomed cookware, no matter how carefully you handle them. Look over the bases every so often and replace pieces that have become noticeably rough.
Cast iron deserves extra care because its naturally textured bottom is more likely to scratch glass than stainless steel or aluminum. If you use it, lift it straight up and down, and never drag it. On induction models, also keep pan bases clean and dry, since grit stuck to the bottom acts like sandpaper.
Should you use the cooktop as extra counter space?
It is best not to. Setting down heavy items, cutting boards or canisters on a cold cooktop adds wear over the years, even with careful placement. Cutting directly on the glass is worse, and so is dropping a heavy pan on it.
Treat the surface as a cooking area. A cooktop that is only ever used for cooking and cleaned gently stays in better condition for far longer.
What can cleaning not fix?
Cracks, chips and deep scratches that catch a fingernail are physical damage, and no cleaning routine can reverse them. Depending on how severe the damage is and where it sits, a cracked cooktop can be a safety concern. Stop using it and have it assessed instead of carrying on as usual, particularly on an induction model, where the surface protects the electronics and the field generated beneath it.
Cleaning can remove burnt-on residue and light film, but it cannot remove a pit or a scratch. If cleaning never restores the shine, the finish is probably worn rather than dirty.
Frequently asked questions
Can I use a razor scraper on a glass cooktop?
Yes, a scraper made for glass cooktops works well on burnt-on spills when used flat and at a low angle. Avoid kitchen knives and metal tools that can gouge the glass, and use light pressure so you do not scratch it.
Why does my cooktop look cloudy even after cleaning?
Cloudiness is usually a thin film of cleaner residue or a build-up of fine scratches. A cooktop cream and a clean damp cloth followed by a dry soft cloth often remove film. Scratches cannot be wiped away.
Is it safe to cook on a cooktop with a small crack?
No. A crack can spread, let moisture reach the parts underneath and, on an induction model, affect the electronics. Stop using it and have a technician assess the damage before cooking on it again.
How often should I clean the cooktop?
Wipe it after every use once it has cooled, and use a cooktop cream whenever you see film or marks. Dealing with small messes right away prevents most of the hard-to-remove residue.