What E67 Means
E67 is a heaters sensing failure. The electronic control board checks the state of its heater circuits, and E67 means that check failed. Electrolux names the control board as the cause and says to replace it and retest.
Common Causes of E67
- Heater sensing circuit on the control board failed
🔧 One Safe Check You Can Try
Reset the dryer by unplugging it or switching off its breaker for a minute. If E67 comes back, book service.
⚠ Why You Shouldn't Go Further Than That
- The board handles 240 V heater circuits and is replaced as an assembly.
- Heater wiring is still checked so the new board is not damaged.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.