What F30 Means
F30 is an open probe connection, meaning the oven temperature sensor circuit reads open. Electrolux’s owner article suggests a reset by unplugging or switching the breaker for 30 seconds. The service action is to check the sensor resistance at room temperature against the RTD chart (about 1,090 ohms at 75 F) and check the harness.
Common Causes of F30
- Oven temperature sensor open
- Sensor connector loose at the rear
- Harness broken between control and sensor
🔧 One Safe Check You Can Try
Reset at the breaker for 30 seconds. If the range has a meat probe jack, make sure no damaged probe is plugged in.
⚠ Why You Shouldn't Go Further Than That
- The sensor connector is behind the rear panel.
- Ohm readings against the chart decide between sensor and harness.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.