What E95 Means
E95 is a communication problem between the microprocessor and the external EEPROM, the memory chip that holds the washer’s settings and cycle data. When the processor cannot read it, the control stops.
Common Causes of E95
- EEPROM memory on the main board failed
- Board damaged by a power surge
🔧 One Safe Check You Can Try
Restart after unplugging for one minute. Since the memory is on the main board, there is no owner step beyond the reset.
⚠ Why You Shouldn't Go Further Than That
- The memory chip is part of the main board and is not replaced separately.
- A replacement board must match the model’s configuration.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E95
- Appliance
- Electrolux washers
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.