Front-load washers get musty because the door gasket fold, the detergent drawer and the drain filter hold water and residue between loads, which lets mold and mildew grow. Wipe the gasket dry, leave the door and drawer open, use less detergent and run a monthly cleaning cycle. A gasket that stays smelly may need replacing.
Why do front-load washers get musty?
Front-load washers, including Electrolux Wave-Touch and IQ-Touch models, use less water and energy than older top-load designs. The trade-off is that the same rubber door gasket that makes a front-load washer possible also forms a fold where water, lint and detergent residue sit undisturbed between loads.
Left alone, that damp, dark space is exactly what mold and mildew need. The smell that results is what most people call a musty washer.
Where does the smell actually come from?
The gasket fold at the bottom of the door opening is the most common source, but rarely the only one. Detergent residue can also build up in the dispenser drawer, especially with liquid detergent or softener used in larger amounts than needed.
A drain filter that has not been cleaned in a long time can hold standing water and debris, adding its own odor. The table lists each spot and how to deal with it.
| Where it hides | What builds up | What you can do | How often |
|---|---|---|---|
| Door gasket fold | Water, lint and residue | Wipe dry; leave door open | After the last load |
| Detergent drawer | Dried detergent and softener | Remove and rinse; leave open | Monthly |
| Drain filter | Debris and standing water | Open the access panel and clean it | Every few months |
| Drum | Film from excess detergent | Empty cleaning cycle | Monthly |
| Gasket that stays smelly | Absorbed odor | Have it inspected for replacement | When cleaning fails |
What habits prevent the smell?
Wipe the gasket fold dry with a cloth after the last load of the day. It takes under a minute and removes most of the moisture mold needs. Leave the door and detergent drawer open between washes, so the remaining moisture evaporates instead of sitting in a sealed cabinet.
Use the amount of detergent the cycle actually calls for, often less than people assume, particularly with high-efficiency formulas. Once a month, run an empty cycle with a washer-cleaning product, or with hot water and a cup of white vinegar in the drum, to clear what wiping cannot reach.
Does leaving wet laundry in the drum make it worse?
Yes. Wet laundry left in the drum after a cycle, even for a few hours, gives mold a head start that an empty, aired-out drum does not. Move the load to the dryer promptly, or pull it out to air-dry if the dryer is busy.
Removing that trapped moisture addresses something a wiped gasket alone will not.
Does detergent choice affect odor, and when are habits not enough?
Standard, non-HE detergent used in a high-efficiency front-load washer produces far more suds than the machine can rinse away completely. The excess residue feeds odor-causing buildup in the drum and gasket. Confirm that your detergent is labeled for high-efficiency machines and use the amount the cycle calls for.
If a consistent routine does not fix the smell, or it returns within days of a deep clean, the gasket may have absorbed odor beyond what surface cleaning can remove, especially on an older machine, or the drain system may need a closer look. Replacing a badly affected gasket is a legitimate repair if regular care has not solved the problem.
Safety and materials matter when you clean. Never mix bleach with vinegar or ammonia-based products, because the fumes are harmful. Use the cleaner your owner’s manual recommends for your model, and wear gloves if you wipe the gasket by hand. Pull back the rubber fold and look for black or pink spots. A soft brush and a mild cleaner usually remove light mildew. If the gasket is torn, thin or permanently stained, it is time for a replacement. Also wipe the inside of the door glass and the dispenser opening while you are there, since they collect the same film.
Frequently asked questions
Is a musty smell harmful?
It usually means mold or mildew growth in a damp spot, which is unpleasant and can transfer odor to laundry. It is worth fixing for freshness, and the cleaning steps here are safe for most households.
Can I use bleach to clean the washer?
Follow your Electrolux owner support information for your model. Washer-cleaning products and a hot vinegar cycle are common choices, but never mix cleaning chemicals, because the fumes can be dangerous.
Why does my washer smell even after a cleaning cycle?
Residue can remain in the gasket, the drawer or the drain filter, which a drum cycle does not reach. Clean each of those by hand, and check whether the gasket itself has absorbed the odor.
Should I keep the door open all the time?
Leave it open between washes so air can dry the drum and gasket. If small children or pets are in the home, a door left open can be a safety concern, so choose a position that keeps the gap safe.