What EA2 / EA3 Means
EA2 means the supply voltage is too high and EA3 means it is too low. Electrolux groups them under test 12: have the power company check the incoming voltage; if it is within limits, replace the main board.
Common Causes of EA2 / EA3
- Extension cord or long thin run dropping voltage (EA3)
- Utility supply high or low
- Loose house neutral giving unstable voltage
- Main board voltage sensing failed
🔧 One Safe Check You Can Try
Plug the washer straight into a dedicated receptacle and remove any extension cord or adapter. Low voltage often shows up as lights dimming when the washer spins.
⚠ Why You Shouldn't Go Further Than That
- House wiring problems need an electrician.
- The main board is only replaced after the supply is verified.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- EA2 / EA3
- Appliance
- Electrolux washers
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.