What E93 / E97 Means
The Electrolux chart describes both E93 and E97 as a console or main board control problem, meaning the configuration or program data the two boards exchange does not match. Test 11, the interface-to-main-board wiring check, applies.
Common Causes of E93 / E97
- Replacement board not matched to the console
- Corrupted configuration in the main board
- Wiring between console and main board
🔧 One Safe Check You Can Try
A power reset is the owner step. If either code appeared right after a board was replaced, the new board may not match the console; tell the technician which part was changed.
⚠ Why You Shouldn't Go Further Than That
- Matching boards to a console depends on the exact model and revision, printed on the serial tag.
- Flashing or configuring boards is done with service tools.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E93 / E97
- Appliance
- Electrolux washers
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.