What E00 Means
E00 appears only when the stored error history is read: pressing CANCEL and START together for 6 seconds, or turning the knob 9 clicks in diagnostic mode, shows the last codes, and E00 means no error was stored. The Electrolux manual says so explicitly.
Common Causes of E00
- No error stored in the washer’s memory
🔧 One Safe Check You Can Try
If you were reading the history because the washer stopped and it shows E00, the stop was not logged as an error. Check the door, the faucets and the load, and look at the troubleshooting section of the use and care guide.
⚠ Why You Shouldn't Go Further Than That
- Nothing to repair when E00 is shown.
- If the washer starts and then shuts off with E00 stored, Electrolux’s manual suggests checking the main board connections, which is a service step.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.