What E 92 / E 93 Means
E 92 means the 12-volt supply on the service section of the two-zone module is too low, and E 93 an overcurrent on the switched 5-volt supply. Both are internal supply codes; Electrolux tests the filter board connections and replaces the two-zone filter board, then the generator board.
Common Causes of E 92 / E 93
- Internal supply on the two-zone filter board failing
- Short on the 5 V line
🔧 One Safe Check You Can Try
Reset at the breaker for 30 seconds.
⚠ Why You Shouldn't Go Further Than That
- Internal supplies are measured on energized boards.
- A short can damage a replacement board if not found.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E 92 / E 93
- Appliance
- Electrolux cooktops
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.