Electrolux Dryers

Electrolux EIED55H

Model # EIED55H

The EIED55H is an 8.0 cu. ft. IQ-Touch electric dryer, and its tech data sheet lists more than thirty codes with resistance values for each thermistor. The outlet thermistor should read 4.9 to 6.2 kilohms at room temperature and the inlet 47 to 66 kilohms, which lets us test both without guessing.

Most EIED55H heating complaints trace back to airflow: a vent that is too long or crushed trips the high limit, and repeated trips set E65.

Key Features

  • 8.0 cu. ft. electric front-load dryer (Electrolux model support page for EIED55HIW)
  • IQ-Touch controls
  • Diagnostic mode with error history and thermistor readouts

Most Common Issues on This Model

01

E65 high limit trips from long or crushed vents

02

E64 open heater after overheating

03

E31 or E32 from coated moisture sensor bars

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 483-2989 now

FAQ

Electrolux EIED55H FAQ

With the vent and the heater. An open heater sets E64, and a vent restriction sets E65; both are measured before parts are ordered.

Yes. Wake the dryer and hold cancel and start pause together for six seconds; E00 means nothing is stored.

Need a repair? We're ready to help. Call Now
Call Us Schedule