What E 10-E 16 Means
Codes 10, 11 and 12 are center zone key sensor failures and 14, 15 and 16 the right rear zone on the Icon 36-inch induction cooktop. Electrolux groups them because the center and right rear keys share one touch control: test its cables to the main power touch control, then replace that center/right rear control.
Common Causes of E 10-E 16
- Moisture or grease over the keys
- Cable to the center/right rear touch control loose
- Center/right rear touch control failed
🔧 One Safe Check You Can Try
Clean and dry the glass above the center and right rear keys, then switch the breaker off for 30 seconds.
⚠ Why You Shouldn't Go Further Than That
- Touch controls sit under the ceramic glass.
- Replacement parts are specific to the Icon cooktop.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E 10-E 16
- Appliance
- Electrolux cooktops
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.