What E 30 / E 70 Means
E 30 and E 70 mean the AC input voltage is too high at the three-zone induction module of the Icon 36-inch cooktop. The service steps: verify the voltage at the cooktop input, verify the main input cables, screws and jumpers, then replace the filter board in the three-zone module.
Common Causes of E 30 / E 70
- High supply voltage
- Loose input screw or jumper
- Filter board sensing failure
🔧 One Safe Check You Can Try
If the house has other signs of high voltage, such as bulbs burning out quickly, mention it. Otherwise reset at the breaker.
⚠ Why You Shouldn't Go Further Than That
- Input terminal checks are 240 V work.
- The filter board is inside the induction module under the cooktop.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E 30 / E 70
- Appliance
- Electrolux cooktops
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.