What E 39 Means
E 39 is a configuration mismatch between the user interface and an induction module, which Electrolux says occurs when one of the two-zone induction modules is replaced. The manual resolves it with a key sequence using the WARM key and the zone ON keys that starts a reconfiguration, and replaces the filter board if needed.
Common Causes of E 39
- New induction module not configured
- Configuration lost
🔧 One Safe Check You Can Try
If a module was just replaced, the reconfiguration is part of that repair. Otherwise reset at the breaker.
⚠ Why You Shouldn't Go Further Than That
- The reconfiguration sequence is a service procedure.
- A wrong module can never be configured correctly.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.