What F30 Means
F30 on an Electrolux wall oven is an open probe, the temperature sensor circuit reading open. Electrolux’s oven guide suggests a reset by unplugging for 30 seconds or switching off the breaker, noting that the breaker resets everything on that circuit.
Common Causes of F30
- Oven sensor failed open
- Sensor connector loose behind the oven
🔧 One Safe Check You Can Try
Switch off the oven’s breaker for 30 seconds. If F30 returns, book service.
⚠ Why You Shouldn't Go Further Than That
- The connector is at the back of the oven, reached by sliding the oven out.
- Sensor tests need a meter.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- F30
- Appliance
- Electrolux wall ovens
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.