What E46 Means
E46 is a door command sense code. When the main board sends the lock command, it also watches that the command actually went out; E46 means the board did not see its own lock command on the line.
Common Causes of E46
- Main board lock drive circuit failed
- Short or open in the lock wiring
- Door lock drawing abnormal current
🔧 One Safe Check You Can Try
Restart the washer after a one-minute power-off. Because E46 concerns the lock drive circuit rather than the door position, there is nothing on the door itself for the owner to adjust.
⚠ Why You Shouldn't Go Further Than That
- Diagnosing a drive circuit means live measurements at the main board connectors.
- Replacing the board without checking the lock can burn out the new board if the lock is shorted.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E46
- Appliance
- Electrolux washers
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.