The ECVW3662AS shares the ECVW3062AS’s touch controls, LED lighting and responsive heat sensor in a wider body for a 36-inch cooktop. A fan speed that drops on its own mid-cook and later returns to normal is often the heat sensor recalculating as cooktop temperature changes, since this hood’s control logic adjusts fan speed automatically rather […]

The ECVI4262AS is a 42-inch island-mount hood sharing the touch controls, LED lighting and responsive heat sensor used across Electrolux’s current ECV-series, sized for a wide cooktop with no wall behind it. Uneven draw across a 42-inch width is checked at the filters and the blower inlet before assuming a duct problem, since a partly […]

The RH30WC55GS is a 30-inch externally vented wall-mount chimney hood with a 600 CFM internal blower and dishwasher-safe stainless filters. Because it vents to the outside rather than recirculating, most low-airflow calls on it start at the wall cap and the duct run rather than inside the hood body. A steady hum at every speed, […]

The RH36WC55GS is the wider counterpart to the RH30WC55GS, built around the same 600 CFM internal blower and externally vented chimney design but sized for a 36-inch cooktop. A speed selector that will not advance past its lowest setting is checked at the control switch first, since that fails far more often than the blower […]

The RH30WC60GS pairs the same 600 CFM internal blower used on the WC55GS chimney hoods with a glass-panel canopy and a 4-speed electronic control rather than a simple rocker switch. When the display goes blank but the blower keeps running on whatever speed it was last set to, that points to the control board rather […]

The RH36WC60GS shares the RH30WC60GS’s glass-canopy design and 4-speed electronic control in a wider body for a 36-inch cooktop. A delay timer that fails to shut the hood off on schedule, or a fan that cycles between speeds without anyone touching the control, both point to the electronic control board rather than the blower motor, […]

The RH36PC60GS is Electrolux’s island version of its glass-canopy chimney hood, hanging from the ceiling over a cooktop with open space on every side rather than mounting to a wall. Because an island hood has no wall behind it to help contain rising air, it is more sensitive to cross-drafts from a nearby window, door […]

The EI30HI55KS is a 30-inch custom hood insert, sold as the ventilation and lighting unit alone for building into a wood, tile or masonry surround rather than as a complete hood body. It can be ordered with either an integrated 600 CFM blower mounted in the insert itself or a remote blower rated up to […]

The EI36HI55KS is the wider version of Electrolux’s custom hood insert, built into a surround the same way as the EI30HI55KS and offered with the same choice of an integrated or remote blower. On a remote-blower installation, a drop in airflow is more often a duct problem than an insert problem, since the insert itself […]

The EI30WC55GS is an earlier model number for the same 30-inch chimney hood later sold as the RH30WC55GS, sharing its 600 CFM internal blower and an electronic control with a blue display, timer and an auto-start heat sensor. A heat sensor that fails to start the fan automatically is checked at the sensor itself before […]