What Heat Sensor Auto Fan-On Means
This is not an error. Electrolux’s use and care guide for its current wall-mount canopy range hoods (the ECVW3062AS and ECVW3662AS) says a heat sensor automatically turns the fan on at medium speed, or raises it from low to medium, when it senses a temperature over 158 F (70 C). These hoods have no display, so the only sign the owner sees is the fan switching on, or changing speed, by itself.
Common Causes of Heat Sensor Auto Fan-On
- A pot boiling over, searing, or a high flame under the hood
- The hood mounted lower than Electrolux’s clearance instructions call for
🔧 One Safe Check You Can Try
No action is needed. Electrolux’s guide says the fan speed can be raised to high but not lowered below medium, or turned off, until the temperature drops; the hood then goes back to normal operation on its own.
⚠ Why You Shouldn't Go Further Than That
- No repair is needed; it is the heat sensor working as designed.
- If the fan keeps switching itself on with no heat under the hood, or will not respond to the speed buttons at all afterward, the heat sensor or control is worth having looked at.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- Heat Sensor Auto Fan-On
- Appliance
- Electrolux range hoods
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.