What Grease Filter Means
Grease Filter is not an error. Electrolux’s installation and use and care guide for its glass-touch range hoods (the RH30WC40GS, RH36WC40GS, RH30WC55GS, RH36WC55GS, RH30WC60GS, RH36WC60GS and RH36PC60GS models, and their earlier EI-prefixed versions) says that after thirty hours of fan run time the display reads “Grease Filter” to remind the owner that the metal grease filters need washing.
Common Causes of Grease Filter
- Thirty hours of fan run time reached since the display was last reset
- Filters left dirty after the reminder was cleared without washing them
🔧 One Safe Check You Can Try
Wash the grease filters by hand or in the dishwasher, then hold the minus (speed-down) button for 5 seconds; Electrolux’s guide says this clears the “Grease Filter” message and returns the display to its normal operation.
⚠ Why You Shouldn't Go Further Than That
- No repair is needed; the display is only tracking run time.
- If the message comes right back after washing the filters and holding the minus button, or the display will not clear at all, the touch control board is worth having looked at.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- Grease Filter
- Appliance
- Electrolux range hoods
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.