What CArE Means
CArE is not an error code. Electrolux’s guide for the glass-touch range hood family says the control has a heat sensor, and when it senses a temperature over 158 F (70 C) near the buttons, the display shows “CArE” while the blower is automatically switched on, or raised, to second speed.
Common Causes of CArE
- A pot boiling over, searing, or a high flame directly under the control area
- The hood mounted lower than Electrolux’s clearance instructions call for
🔧 One Safe Check You Can Try
No action is needed. Electrolux’s guide says the fan can be raised to third speed but not lowered, or turned off, while CArE is showing, and the hood returns to the speed the owner had set once the temperature at the control drops back down.
⚠ Why You Shouldn't Go Further Than That
- No repair is needed; it is the heat sensor working as designed.
- If CArE stays on well after cooking has stopped and the area under the hood has cooled, the heat sensor is worth having looked at.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- CArE
- Appliance
- Electrolux range hoods
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.