What E68 Means
E68 is current leakage to ground on the heater, or a fuse opened. Test 13 checks the resistance between ground and both heater terminals, which should be open with the heater wires disconnected; any reading means the element has broken down and is leaking to the tub.
Common Causes of E68
- Heating element sheath cracked and leaking to ground
- Water in the heater connection area
- Fuse in the heating circuit opened
🔧 One Safe Check You Can Try
Stop using hot or sanitize cycles. If the washer trips a GFCI receptacle or breaker when it heats, leave it unplugged and book service; do not reset the GFCI repeatedly.
⚠ Why You Shouldn't Go Further Than That
- Current leaking to ground from a water heater inside a metal tub is an electrical safety hazard.
- The element is replaced from under the tub and must be sealed correctly or it leaks.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- E68
- Appliance
- Electrolux washers
- Maker documentation
- Electrolux owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Independent service.